Product ID:379-109, NAVY GREY PINTS
MSDS Date:08/05/1992
FSC:8010
NIIN:00N034526
MSDS Number: BPWHM

ADVANCE COATINGS CO

DEPOT ROAD
WESTMINSTER, MA 01473
US

Emergency Phone: 508-874-5921

Info Phone: 508-874-5921

Cage: 3K491

ADVANCE COATINGS CO

WESTMINSTER, MA 01473 US

Telephone: 978-874-5921

Cage: 3K491

38 +/-1.5%

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: INGRED

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

38 +/-1.5%

Fraction By Weight: INGRED

24 +/-1.5

Fraction By Weight: INGRED

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MODERATE IRRITANT. CHRONIC:
LONGTERM EXPOSURE MAY CAUSE NAUSEA, LOSS OF APPETITE, CNS
DEPRESSION AND GENERAL WEAKNESS.
Explanation of Carcinogenicity:STYRENE: GROUP 2B(IARC).
Effects of Overexposure:OVEREXPOSURE MAY CAUSE IRRITATION TO THE
RESPIRATORY TRACT AND TEARING OR REDNESS OF EYES.
Medical Cond Aggravated by Exposure:THIS MATERIAL OR ITS EMISSIONS MAY
AGGRAVATE PRE-EXISTING CNS DISORDER.

First Aid:INHAL: REMOVE TO FRESH AIR, REST. KEEP WARM & GET MEDICAL
ATTENTION. EYE: FLUSH WITH WARM WATER FOR AT LEAST 15 MINUTES.
CONSULT PHYSICIAN. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL
MD . I NGEST: CALL MD IMMED .

Flash Point Method:TCC
Flash Point:94.0F,34.4C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:CARBON DIOXIDE, WATER FOG, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:RESIN SPRAY FROM SPRAY GUN IS MORE
FLAMMABLE THAN LIQUID RESIN. DRUMS OF RESIN IF HEATED IN A FIRE MAY
POLYMERIZE AND BUILD UP MORE INTERNAL HEAT.

Spill Release Procedures:ABSORB WITH VERMICULITE, SAWDUST OR RAGS OR
SCOOP UP WITH SCOOPS OR SHOVELS. CLEAN UP RESIDUE WITH STRONG
DETERGENT WATER SOLUTIONS. (GLOVES & GOGGLES).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID HEAT & FLAMES. ALWAYS USE UP
OLDEST LOTS FIRST. MATERIAL SHOULD LAST 6 MONTHS @ OVER 75F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATORS
ARE RECOMMENDED IF 50 PPM OF STYRENE IS EXCEEDED.
Ventilation:LOCAL EXHAUST: MAINTAIN VAPOR CONCENTRATION OF STYRENE
BELOW 50 PPM.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH FOUNTAINS & SAFETY SHOWERS IN
IMMEDIATE VICINITY OF POTENTIAL EXPOSURE.
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE PRACTICE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:F4
Boiling Pt:B.P. Text:293F,145C
Vapor Pres:4.5@20C
Vapor Density:3.6
Spec Gravity:1.22(H*2O=1)
Evaporation Rate & Reference:0.7(BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS LIQUID, WITH ORDER OF STYRENE MONOMER.

Stability Indicator/Materials to Avoid:YES
NEVER MIX ORGANIC PEROXIDES WITH PROMOTERS. ADD SEPARATELY TO GELCOAT.
Stability Condition to Avoid:AVOID STORAGE OVER 75F. THIS MAY CAUSE
PREMATURE GELATION.
Hazardous Decomposition Products:ON DECOMPOSITION EMITS ACRID FUMES.
INCOMPLETE COMBUSTION PRODUCES CARBON MONOXIDE.

Waste Disposal Methods:BURN WITH COMPATIBLE FUEL. DISPOSE OF IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.